How do I replace a bathtub drain

How do I replace a bathtub drain?




The first step in the process was to remove the old bathtub drain mechanism. Since the lift and lock drain is screwed into the existing drain, the old mechanism had to be removed. To get the old drain out, I used a pair of needle nose pliers and a screwdriver to apply leverage to the drain assembly to help remove it. It only took a few minutes to remove drain - be sure to remove the assembly very slowly. Once the drain assembly is removed, remove all of the plumber's putty that is surrounding the bathtub drain hole in the bottom of the bathtub.

To place the new drain stopper assembly, you will need some new plumbers putty and, of course the new bathtub drain. The photo to the left shows the plumbers putty, and the new drain in the bathtub..... all ready to install... the plumbers putty should be rolled into a long, thin column.... then placed into the bathtub drain.... see the photo on the right...

Once the putty is placed, the final step is to twist the new drain into the bathtub drain hole.... be sure to twist slowly, and to place the drain assembly flush with the bottom of the bathtub... clean the putty from the edges of the drain..... then your bathtub drain replacement will be complete!